Pin Lock Vs.Ball Lock – Learn More..

The containers we contact Ball Lock and Pin Lock Kegs come from the soda industry. Also known as Cornelius Kegs, Corny Kegs and Corney Kegs, they were initially intended to shop and disperse soda pre-mix. The big soda businesses decided on different design containers for their pre-blend. Pepsi landed on the Ball Lock style while Coke utilizes the Pin Lock style.

pin lock kegs

Homebrewers have because re-purposed these as homebrew dark beer kegs.

Initially, It’s important to comprehend both do the same with somewhat various and dimensions featuring. Note: All measurements in this post should be considered approximate. You will find different types and producers of kegs. Their sizes are typically approximately the same, but some kegs and manufacturers vary somewhat. There are many dimensions of kegs available including 2.5, 3, 5, 10 and 15 gallons. This post targets the commonly used 5 gallon dimension.

One thing you’ll notice is dimensions – Pin Lock Kegs wider than Ball Lock kegs. Pin Hair will also be shorter than Ball Lock Kegs. Ball Lock on Left, Pin Lock on Right. These two kegs use a ~5 gallon capacity.

Generally speaking… Both Ball Lock and Pin Lock style lids are the same dimension and they are exchangeable. You can make use of a Ball Lock Cover over a Pin Lock Keg and vice versa. A huge difference are definitely the PRV (pressure comfort device) functions in between the two styles. Both have automatic safety PRV valves. Which is, if the pressure becomes excessive, each will automatically vent for safety factors. The real difference is within manual PRV functionality.

Ball Lock Keg covers have a pull diamond ring that permits you to personally vent the keg as you would like. You may might like to do that just for removing the keg lid or to vent excess pressure in an effort to get down to a lower pressure. Using a manual PRV valve is surely an advantage inside my book and also on this count Ball Lock Design kegs earn. Again, these are generally general statements, check using the keg’s producer or distributor for particular keg lid measurements and PRV performance. Note: There is another less common size of cover/keg psssmu racetrack design. Those are certainly not exchangeable with regular covers.

Since standard Ball Lock and Pin Lock Covers are interchangeable. A good upgrade for Pin Lock kegs is always to change Pin Lock style covers with Ball Lock Style Covers. Ball Lock design covers are, in my view, exceptional as the manual PRV lets you easily vent your keg as needed.

Ball Lock: There are two main post dimensions for standard ball lock kegs. 11/16″ and 7/8″”. These can are available in each 6 point and 12 point, suitable variations. For the bigger 7/8″” articles I’ve observed both 6 point and 12 point styles. A 12 point plug will work over a 6 point article, but not vice versa. For your smaller 11/16″” articles We have only seen 6 point. Not to imply that 12 point do not really exist, I just don’t remember seeing any. I actually have observed a couple of other sizes – 5/8″” and 9/16″”, however i would personally think about these much more uncommon, and low-regular.

This is very important coming from a tool perspective. I suggest a 12 point plug or wrench for bigger 7/8″” articles. Smaller 11/16″” article ought to work with either 6 or 12 point resources. Pin Lock: I am aware of one standard dimension 13/16″. As earlier mentioned this calls for an exclusive notched socket.