Custom Made Patches Online: Netpropatches.Com
Sometimes embroidering directly onto a garment is impractical, impossible or simply ineffective. Creating your very own embroidered patches is an easy alternative for these situations. You can directly sew your design into organza fabric instead of a finished garment. These can then be cut out into patches and sewn onto just about anything. They’re very easy to create and surprisingly beautiful, with results quite comparable to their traditionally embroidered counterparts. And with this method of embroidery, you can precisely position without opening seams, embroidering over lumpy seam allowances or worrying about exact placement when hooping.
What you would need – Besides general machine embroidery supplies (high quality backing, embroidery design, thread, embroidery needles), you’ll need polyester organza to serve as being a base to stitch on. One additional item will help you make perfect appliques: a heat tool. This may be considered a wood-burning tool, a stencil cutter or a multi-purpose tool (offered at most craft stores).
The heat tools have different tips, and you’ll probably find that the main one using a very sharp point is easiest to handle. This tool will melt away excess organza round the outside the embroidery, leaving the outlines intact and providing a soft and pliable applique you can attach to almost anything. Keep a very damp sponge within your work area while melting the organza to clean the tip from the tool and take off any melted organza that might otherwise stain the embroidery thread
Designs – Just about any design can become a patch. Once you evaluate a design, try to find open areas or any areas of straight stitching that may be troublesome. Resist the most obvious thought to remove tile organza round the straight stitching. Straight stitching isn’t stable enough to stand up to wear and tear, as well as the organza will eventually work its solution from under tile stitches. It’s also better to leave the organza inside the open work areas.
Organza is quite stable and stands up well to a heavy stitch count design. Dark colors will show through with light colored thread, so choose a neutral color organza that will work well with many designs. Leave the organza inside the open regions of tile design to add dimension and stability.
Although an excellent base fabric for embroidered patches, organza still must be stabilized. Use either water-soluble backing or a professional-quality, tear-away backing. Attempt to match the backing to the garment fabric so the design will blend to the background. Usually one layer will suffice, however if the stitch count warrants a heavier backing, use multiple layers. It can still provide a soft, pliable applique. Hoop the backing and organza together in a hoop big enough to accommodate the embroidered design.
Note: Slippery organza is going to be easier to hoop if you first adhere it towards the backing having a temporary spray adhesive.
Once the design is stitched on the organza, remove it from the hoop, and gently remove excess backing from tile back. Remove all backing before melting the organza. The backing will leave a gummy residue on the heat tool and can mar the embroidery. Use tweezers to eliminate any backing caught in small areas. Although it’s generally not suggested to clip the tlrreads on tile back of any design, clip any that may show on the front. Leave some thread tails that can be tucked behind the applique when you attach it for the garment. Use the heat tool to get rid of excess organza from across the fringe of your design. This is actually the exact same technique used qawntn professionally manufactured custom embroidered patches.
Run the tool approximately 1/8″ away from the design edges. Don’t get too close, as polyester embroidery threads will melt using this source of heat. Rayon embroidery thread can better withstand the warmth of the tool. Once the organza is melted, the applique boasts stable edges and secure outlines.
Attaching the patches you’ve created – Always employ a thread color that matches the design outline. Then machine stitch appliques in position employing a narrow zigzag. Or hand-sew to secure using small overcast stitches.
On sleeves or pant legs, the circumference would be the deciding factor for how an applique is attached. For example, on the featured garment, too-narrow sleeves prohibited machine-applied appliques. When attaching multiple appliques on one garment, use the same technique throughout to find the best overall look. Once each of the appliques will be in place, attach any desired trims and buttons.